XProtect MIP plugin for Elkron Alarm Systems
The Elkron MIP plugin allows the management of Elkron control panels via Milestone XProtect.
Updated on Thursday, February 22, 2024
Elkron MIP Plugin 1.0 allows you to manage Elkron security systems via Milestone XProtect. It allows the control of zones, partitions, outputs, scenarios and many other features. Through the operator interface it is possible to interact with the system and view the events of the control units.
What is needed
From Urmet Innovation Srl
-
Elkron MEDEA
-
Elkron MP3000
From Milestone Systems
-
Milestone XProtect
Overview
How it works
How to install
Overview
XProtect MIP plugin for Elkron Alarm Systems - The Elkron MIP plugin allows the management of Elkron control panels via Milestone XProtect.
The Elkron plug-in allows centralized management of alarm systems, i.e. displaying their status on maps and carrying out the main actions such as total and partial arming of the system rather than starting scenarios, and other functions.In addition to system management, if the control panel is equipped with virtual inputs/outputs, it is possible to associate the events coming from the devices managed by Milestone with corresponding virtual inputs. This approach opens up the possibility of significantly expanding the detection capabilities of the anti-intrusion system, in fact it is possible to use the advanced video analysis present in new generation cameras to detect anomalous behavior and make the anti-intrusion system intervene accordingly.
Similarly to the virtual inputs, the virtual outputs of the Elkron control panels can be virtually connected the cameras to send commands (change PTZ position, start local recording etc. etc.).
Key features
- The plugin allows the management of a virtually unlimited number of Elkron control panels from a single Milestone XProtect. No license costs.
- The plugin during configuration automatically downloads the control panel configuration.
- The plugin allows control of the control unit: arming/disarming the system, starting scenarios, inhibiting inputs, controlling outputs.
- The plugin allows continuous reception of Elkron events and states even when the operator panel is not connected.
- The plugin can interact with the virtual inputs and outputs of the Elkron control panels to obtain advanced interaction.
How to install
Documentation
This is where you can find additional documentation
| Installation Guide 1.0 IT | pdf Download (1.02 MB) |
Milestone Verified
Read verification
Installers
Here you can find more information about installers and installation guides
| Title | Installer Guide | Installer Software |
|---|---|---|
| zip Download (2.70 MB) |
Specification
Required Urmet Innovation Srl product(s)
Elkron MIPPlugin v.1.4.7.0
Has proven compatibility with the following Milestone versions:
-
XProtectExpress+2023 R2, 06/20 2023
-
XProtectCorporate2023 R2, 06/20 2023
-
XProtectExpert2023 R2, 06/20 2023
-
XProtectEssential+2023 R2, 06/20 2023
-
XProtectProfessional+2023 R2, 06/20 2023
Is also expected to work with:
-
XProtectExpress+2023 R1, 03/07 2023 and later
-
XProtectCorporate2023 R1, 03/07 2023 and later
-
XProtectExpert2023 R1, 03/07 2023 and later
-
XProtectEssential+2023 R1, 03/07 2023 and later
-
XProtectProfessional+2023 R1, 03/07 2023 and later
Country availability
Your location is: United States
Unavailable for your location
-
EUROPE
- France
- Germany
- Italy
- Portugal
- Spain
Language versions available
English
Italian
Similar pages
View more (8)